Flash schematics checklist
Reading time : 1 minute
Published on 17 Jun 2020 - Updated on 05 Dec 2020
| Document | Category | Item |
|---|---|---|
| Schematics | Flash Nand | NAND pins are connected to CPU capable nand pins |
| Schematics | Flash Nand | NAND WP pin is pulled correctly |
| Schematics | Flash Nand | NAND RDY signal has correct pull up |
| Schematics | Flash Nand | If NAND is a boot device, check that configuration is correct |
| Schematics | Flash SPI | SPI pins are connected to CPU capable SPI pins |
| Schematics | Flash SPI | If SPI is a boot device, check that configuration is correct |
| Schematics | Flash | CPU is configured to boot on the flash |
| Schematics | Flash | Flash size is correct |
| Schematics | Flash | Flash type is correct |